I in SEA region. Both me and my friend in the same country but most of the time connect via LAN have very high ping or can't connect straight up LAG is regular. I want to improve this problem. It could just be me being dumb plz help
Relay connection is not an error. It's one of Radmin VPN connection type that takes place when direct connection is not possible.
There are a lot of factors like many routers between Radmin VPN and Internet, NATs, firewalls, network topology, router settings, closed ports etc. And also torrents, network channel congestion and Windows updates.
Check your other software, like working VPN or VMware, VirtualBox, Docker Desktop, temporary remove them from Windows and restart computer, check connection.
Here are some ways to avoid this connection type, but they don't guarantee non relayed connection:
1. Both PCs (local and remote) are placed in the same network.
2. One of PC has direct IP address.
3. Routers with direct IP have the following NAT settings: one NAT, Full Cone NAT,Address-Restricted cone NAT, Restricted cone NAT, Port-Restricted cone NAT
Fix the relay connection in this way:
- The first user enters the router settings, turns on the DMZ function and indicates his local address there
- The second user enters the router settings, turns on the DMZ function and indicates his local address there
- Both users, after accepting the router settings, reboot the router, after turning off Radmin VPN
- After the reboot is complete, both users log into Radmin VPN
Hello,
Relay connection is not an error. It's one of Radmin VPN connection type that takes place when direct connection is not possible.
There are a lot of factors like many routers between Radmin VPN and Internet, NATs, firewalls, network topology, router settings, closed ports etc. And also torrents, network channel congestion and Windows updates.
Check your other software, like working VPN or VMware, VirtualBox, Docker Desktop, temporary remove them from Windows and restart computer, check connection.
Here are some ways to avoid this connection type, but they don't guarantee non relayed connection:
1. Both PCs (local and remote) are placed in the same network.
2. One of PC has direct IP address.
3. Routers with direct IP have the following NAT settings: one NAT, Full Cone NAT,Address-Restricted cone NAT, Restricted cone NAT, Port-Restricted cone NAT
Fix the relay connection in this way:
- The first user enters the router settings, turns on the DMZ function and indicates his local address there
- The second user enters the router settings, turns on the DMZ function and indicates his local address there
- Both users, after accepting the router settings, reboot the router, after turning off Radmin VPN
- After the reboot is complete, both users log into Radmin VPN