I have been trying to setup connection via radmin with my friend, I can ping myself just fine and other PC, but he can't ping himself even, He tried pinging me it showed general error, tried disabling firewall, didn't help
Any and all ideas are welcome!
Hello!
You need to run cmd(command prompt), press Win + R to open the Run window.
Type "cmd" and click "OK" to open a regular command prompt.
At the command line, enter the command: ipconfig /all and send the result of Famatech Radmin VPN adapter from cmd your and your friend
Description . . . . . . . . . . . : Famatech Radmin VPN Ethernet Adapter
Physical Address. . . . . . . . . : 02-50-36-F3-58-D0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : fdfd::1a16:ae93(Preferred)
Link-local IPv6 Address . . . . . : fe80::22f6:10ad:1987:37d4%16(Preferred)
IPv4 Address. . . . . . . . . . . : 26.22.174.147(Preferred)
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 26.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268587062
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-2B-71-A3-F4-3C-7C-3F-21-BD-04
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
His:
Description . . . . . . . . . . . : Famatech Radmin VPN Ethernet Adapter
Physical Address. . . . . . . . . : 02-50-7A-2A-41-DE
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 26.4.191.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 26.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Hello!
Check that server or remote PC to whom you trying to connect is available, you can use the Radmin VPN menu and select the "Ping" function in the menu if there is no answer,
you need add the ip address to the exceptions or if this a game server , you need to add ports in firewall windows
Control Panel - Windows Defender Firewall - Advanced Settings - Connection Security Rules (right click on Connection Security Rules) - Create Rule - Custom - Specify Server IP Address
Control Panel - Windows Defender Firewall - Advanced Setting - Connection Security Rules (right click on Connection Security Rules) - Port- Next - add port
If windows firewall gives an error with a certain code, then it is worth resetting the firewall settings to default, through the control panel - Windows Defender Firewall - Restore default values
Go back to Radmin VPN and firewall exceptions - allow all applications
Also I believe it will be worth mentioning we are connecting to my pc or rather I am hosting the network.
Windows 11 be like